Understand what is changing inside your body—not just the number on the scale. An EVOLT360 scan gives you meaningful body-composition data you can use to track progress and make more informed decisions about your goals.
Available to Fitness Factory members, non-members, visitors and existing EVOLT users. No gym membership required.
Already a Fitness Factory member? Explore Monthly EVOLT360 OptionsA traditional scale tells you how much you weigh. It cannot tell you how much of that weight comes from body fat, lean tissue, muscle or water—or how those areas may be changing over time.
That means two people can weigh exactly the same and have very different body compositions. It also means your weight may stay relatively stable while you are losing fat, building lean tissue or experiencing changes in hydration.
When you can see more than total body weight, you gain a clearer way to recognize progress, understand patterns and decide what deserves your attention next.
EVOLT360 uses bioelectrical impedance analysis, commonly called BIA. During the scan, a low-level electrical signal travels through the body. The resistance to that signal—together with information such as your height, age, weight and gender—is used to calculate body-composition estimates.
Like other body-composition technologies, EVOLT360 provides estimates rather than a direct measurement of every tissue in the body. The greatest value comes from comparing results over time under similar scanning conditions.
Your EVOLT360 results provide a more complete picture of your body composition. Instead of focusing on one number, you can begin to see how fat, muscle, water and other measurements work together—and how they may be changing over time.
Shows approximately how much of your total body weight comes from fat. Tracking the trend over time can provide more context than body weight alone
Reflects the estimated amount of muscle attached to your skeleton that supports movement, strength and physical activity.
Measures the estimated fat stored around the organs in your abdominal area. It is different from fat stored directly beneath the skin and is best viewed as a trend.
Represents the estimated amount of water in your body. Hydration and normal fluid changes can influence this result.
Estimates the energy your body uses at rest to support essential functions. It is not a complete daily calorie target.
Breaks down the estimated distribution of lean mass and fat mass throughout your arms, legs and trunk.
One scan gives you a starting point. Repeat scans taken under similar conditions help you follow patterns, recognize meaningful changes and have better conversations about your goals.
Your body is constantly changing. Hydration, food intake, exercise, caffeine, alcohol and even the time of day can influence a body-composition reading.
That does not make the information meaningless. The best way to use your results is to compare scans taken under reasonably similar conditions and focus on the pattern over time—not small changes from one reading.
Schedule repeat scans at approximately the same time of day.
Arrive normally hydrated and keep fluid intake reasonably consistent.
Food, caffeine and pre-workout products can influence scan conditions.
Avoid scanning immediately after exercise when possible.
A single result is one moment in time. Consistent monthly scans make it easier to see whether overall trends are moving in the direction of your goals.
EVOLT360 helps you see what may be changing beneath the number on the scale. Fitness Factory helps you understand how that information connects to your goals and what to pay attention to next.
One-time clients receive app results and an optional brief orientation. Monthly Add-On and Momentum members receive a monthly scan plus Fitness Factory goal review and accountability.
Whether you want one detailed snapshot or a monthly system for tracking progress, there is an EVOLT360 option that fits where you are right now.
Start with one scan for a current snapshot; choose the Add-On if you already have Foundation and want recurring support; choose Momentum for gym access and monthly EVOLT360 together.
We reserve approximately 15 minutes for your EVOLT360 appointment. This gives you time to check in, confirm your information, complete the scan and receive the level of results support included with your option.
Create and activate your EVOLT Active profile. Use accurate information and the same email and phone number at the scanner.
Arrive for your appointment and confirm anything that may affect the scan.
Remove shoes and socks, stand barefoot, hold the handles and remain still. The machine portion typically takes about 60 seconds.
Your results connect to your EVOLT Active account.
One-time clients may receive a brief orientation; recurring pathways receive the included monthly goal review.
Avoid scanning during pregnancy. If you have a pacemaker or another implanted electronic medical device, consult your healthcare provider before use. Fitness Factory cannot provide medical clearance.
Your results reflect the conditions present when you scan. Follow the same general routine before each appointment, and let us know if something was different.
Your results are connected to your personal EVOLT Active account. After your scan, view measurements, revisit previous results and follow changes over time from your phone or computer.
Review measurements generated during your scan.
Follow trends instead of relying on memory or one number.
Use the same email address and phone number in the app, booking and scanner login.
Learn what different measurements mean and how they relate to the report.
Your app may also show estimated calorie, macronutrient or nutrition guidance based on profile information and goals. These are educational starting points, not medical or individualized nutrition treatment.
One-time clients receive the included brief orientation level. Monthly Add-On and Momentum members receive ongoing monthly goal-review support.
Straightforward answers to common questions about scans, preparation, results and Fitness Factory options.
EVOLT360 uses bioelectrical impedance analysis, commonly called BIA, to calculate body-composition estimates from a low-level electrical signal and your profile information. It can provide more than 40 available measurements and is most useful for tracking patterns over time under similar scanning conditions.
Available estimates include body fat percentage, skeletal muscle mass, visceral fat, total body water, basal metabolic rate, segmental analysis and other measurements. Together, these provide more context than body weight alone.
No. The $29 one-time scan is available to members and non-members. An active Foundation membership is required only for the $20-per-month EVOLT360 Monthly Add-On. Momentum combines 24/7 gym access with monthly EVOLT360 scanning and goal-review support.
For a more consistent comparison, avoid alcohol for 24-48 hours, heavy training on the day of the scan, food for approximately 3-4 hours, and caffeine or pre-workout when practical. Arrive normally hydrated, use the restroom when possible, and follow a similar routine before future scans.
The scan is non-invasive and uses a low-level electrical signal that most people do not feel. Avoid scanning during pregnancy. If you have a pacemaker or another implanted electronic medical device, consult your healthcare provider before use. Fitness Factory cannot provide medical clearance.
Fitness Factory reserves approximately 15 minutes for the appointment. This allows time to check in, confirm your information, complete the scan and receive the level of results support included with your option. The machine-scanning portion typically takes about 60 seconds.
One-time scans include an optional brief results orientation. The EVOLT360 Monthly Add-On and Momentum include a more complete monthly Fitness Factory goal review and accountability support.
Fitness Factory's ongoing pathways use one scan per month to support meaningful trend review. Repeat scans are most useful when they are completed under reasonably similar conditions and evaluated as a pattern rather than as isolated readings.
Yes. An activated EVOLT Active account connects your profile to the scanner and receives your results. Use the same email address and phone number in the app, booking process and scanner login so your information connects correctly.
No. A one-time scan includes the scheduled scan service, results in EVOLT Active and an optional brief results orientation. It does not include gym or workout access or establish an ongoing coaching relationship.
The $20-per-month EVOLT360 Monthly Add-On adds one monthly scan, a Fitness Factory goal review and accountability to an existing active Foundation membership. Momentum combines 24/7 gym access with an initial scan and goal review, followed by monthly EVOLT360 scanning and continued goal-review support.
No. EVOLT360 is a fitness education, goal-support and progress-tracking service, not medical diagnosis, treatment or advice. Results are estimates and may be influenced by hydration, food intake, exercise, caffeine, alcohol, medications, menstrual-cycle timing and other individual factors.
EVOLT360 uses bioelectrical impedance analysis and profile information to calculate estimates. It is not a direct measurement of every tissue in the body. Its greatest value is in tracking the direction of change over time using the same system under reasonably similar scanning conditions.
Hydration, food intake, exercise, caffeine, alcohol, medications, menstrual-cycle timing, time of day and other individual factors can influence a reading. Small changes do not always represent a meaningful change in body fat or muscle. Focus on the overall pattern across consistently prepared scans.
After confirming your profile information, you remove your shoes and socks, stand barefoot on the scanner, hold the handles and remain still. A low-level electrical signal travels through the body, and the machine portion typically takes about 60 seconds.
Wear light, comfortable clothing that you can use consistently for future scans. Shoes and socks are removed because the scanner requires direct contact with bare feet. Let the Fitness Factory team know if anything about your clothing or scan conditions is unusual.
When practical, avoid food for approximately 3-4 hours before the scan and avoid caffeine, energy drinks, pre-workout and non-prescribed diuretic products. Arrive normally hydrated; do not intentionally dehydrate or overhydrate.
Avoid heavy training on the day of the scan and avoid scanning immediately after exercise when possible. Exercise can temporarily change fluid distribution and may make comparison with previous results less useful.
Yes. Existing EVOLT users may book a one-time scan. Use the same email address and phone number connected to your EVOLT Active profile when booking and signing in at the scanner so your results connect to the correct account.
Your results connect to your personal EVOLT Active account. From the app or compatible online access, you can review available measurements, revisit previous results and follow changes over time. Keep one consistent account so your scan history remains together.
Monthly scans require appointments, do not accumulate or roll over, and may be forfeited after a missed appointment or late cancellation. Appointment policies apply. Cancelling or rescheduling an appointment does not cancel the recurring EVOLT360 service.
No. The EVOLT360 Monthly Add-On and Momentum provide one scan during each applicable monthly service period. Unused scans do not accumulate or carry forward to a future month.
The app may display estimated calorie, macronutrient or nutrition guidance based on your profile information and goals. These are educational starting points, not medical advice or individualized nutrition treatment. Fitness Factory goal reviews stay within the support included with your selected option.
No. You may purchase a $29 one-time scan without joining the gym or enrolling in training. Personal training and other coaching services are separate unless they are specifically included in another written offer or agreement.
Choose the EVOLT360 option that matches the level of access, progress tracking and support you want right now.
Choose Momentum for 24/7 access, initial scan/review and continued monthly support.
For Foundation members who want a monthly scan, goal review and accountability.
See estimated body fat, muscle, water and more in one appointment, without joining the gym or committing to a recurring service. Your results are saved in EVOLT Active, with a brief results review included.
EVOLT360 uses bioelectrical impedance analysis to calculate body-composition estimates. Results may be influenced by hydration, food intake, exercise, caffeine, alcohol, medications, menstrual-cycle timing and other individual factors. EVOLT360 scans and Fitness Factory goal reviews are provided for general fitness education, goal support and progress tracking and do not constitute medical diagnosis, treatment or advice. Individual results vary, and no particular outcome is guaranteed.
A one-time scan does not include gym or workout access or establish an ongoing coaching relationship. Recurring EVOLT360 services are governed by the applicable agreement. Monthly scans require appointments, do not accumulate or roll over and may be forfeited after a missed appointment or late cancellation. Cancelling or rescheduling an appointment does not cancel the recurring service. Final pricing, included services, billing and cancellation terms are confirmed during purchase.
